What is the Process of Door Lock Repair?

What is the Process of Door Lock Repair?

All devices in the home need regular maintenance and your door lock is not an exception. We use door locks every day and so we assume that the lock will always work. But this is not the case, even the best of door locks have a short lifespan.

A minor lock issue can be a dirty or dry lock and this can be fixed by lubricating with graphite. Due to the different variants of door locks available, there are many processes of repairing door locks effectively.

Apart from the different kinds of door locks, there are quite several faults that can arise, this single factor makes understanding lock repair processes hard. We wouldn't want to be confused about knowing what to do when a lock is faulty so, in this article, you'll learn about a few common lock faults and how they can be repaired.

Common Door Lock Faults

Door Lock Cylinder Fault

Lock cylinder problems are the most common kind of door lock fault. The cylinder is the most important of every door lock, any issues that arise with it can cause a security threat. The steps you should take if the lock cylinder has become loose include:

• Remove the lock faceplate to see the screws holding the cylinder inside the lock.
• Disassemble the lock to view the screw placement.
• After disassembling the lock find the screws and tighten them with the proper screwdriver then fix the faceplate.

Loose Doorknob

Over time your doorknob can loosen up, you can easily tighten it up by following these steps.

Loosen the screws on the knob's shank. Then hold the knob from the opposite side of the door and turn the loose knob clockwise until it fits. Tighten the screw until it rests against the flat side of the spindle, the knob should turn freely now.
The next step is to remove the knob and check the spindle, if the spindle is worn out then it should be replaced.

Broken Key

It is very common for a key to get broken off in the door lock. These are different steps that you can use to get the other half of the key out of the keyhole.

• Grab a plier, get a good grip then pull the key straight out.
• Cut off a coping saw blade and with the teeth pointed outward insert the blade into the keyway, hook and drag the key out.
• Remove the cylinder and insert a stiff wire into the cam slot at the back of the cylinder and push the key out.
• Take the cylinder to a professional locksmith at the QuickPro Locksmith team.

Frozen or Dirty Locks

Your locks can freeze, get dirty, or dry, and as we mentioned earlier, to fix this you put some graphite into the keyhole by squeezing and then turning the lock a few times to make sure the graphite works. You can also use lock de-icers that contain alcohol and lubricants to reduce dirty deposits.

Conclusion

Lock repair can be a hassle to you and that's why your best bet is hiring the services of a professional locksmith from Quick Pro Locksmith.